You have mail 2

After having done the hardware for checking mail I had to make some kind of user interface to show that data. I had previously used an old IPhone to display temperature and power usage, so it was an easy choice to continue using it.

Previously I had just used a simple php script to fetch and display data, now I wanted to try python and Flask. I used a tutorial found here to get started.

Code is pretty simple, temperature and electricity usage is fetched every time from database, but this page is usually only open on the extra phone that displays this data so there shouldn't be any reason to cache that data. That data is also updated to database every minute so it should be refreshed every time. Mail status is received over mqtt and it's sent only when it changes so it has to be cached.

I also made a couple of changes to the hardware/firmware section, for the firmware I set the retain flag in the mqtt message so that when clients connect they get the last know value of mail. For the hardware I added a bigger antenna because I have some trouble with the wifi reception. Reception is still not as good as I would like, I have to think about it. Maybe second wifi ap, I'm also thinking if I should build a separate network for IoT-devices, currently there is only one wifi device, but that could easily change. I also changed the psu to one that outputs more current and has a lower quiescent current as I thought that the wifi problem might be because the ESP8266 is not getting enough current to transmit, but that didn't solve the problem. Before I had a cheap chinese buck/boost converter, and now I have https://www.pololu.com/product/2830 which can ouput more current, but is only a buck converter and needs at least 4 volts to output 3.3 volts. So I had to replace the three aaa batteries with four aa batteries to get enough voltage.

Also there is a problem with the mailbox itself:) It let's sunlight through somewhere and that's enough so we can't see if the led is on or not. I'll have to think how to put some seals there.

Future improvements

Hardware

• Monitor battery state.
• Don't turn radio on on wake up, only when we need to send. NodeMCU bug might prevent this currently.

Software

• Move temperature and electricity to mqtt also.
• Add today's forecast.

Software can be found here https://github.com/mika-koivusaari/data_display_phone

You have mail, power usage 2

Still no luck, batteries died over the weekend.

One of my thoughts was that if something goes wrong, for example we don't get wifi connection, then the device just sits there sucking power. So i added a timer just after we wake up that waits for 10 seconds and then goes to sleep, 10 seconds should be plenty time to get a connection and send data.

Also added was error handling to wifi and mqtt connections, if we don't get a connection we go to sleep and try again.

I also added a feature that we only send messages when state changes, and we only wake up the modem when we need to send something. For this I needed a new firmware that has rtcmem module. But the master had changed SDK version and I couldn't get the new firmware to work. I tried erasing (http://nodemcu.readthedocs.io/en/latest/en/flash/#upgrading-firmware) flash but still couldn't get it to work. I had to get the excellent Nodemcu-build docker image and use it to build a previous version. Which worked fine. I tried using the lowest power option in deep sleep, but there seems to be some problem with it, and I couldn't get it to work https://github.com/nodemcu/nodemcu-firmware/issues/1225.

On thing that also was on my mind was the really small antenna that came with the Esp-201 modules. Most likely a better antenna would give less trouble. I had some old adsl-modems laying around that had built in wifi with external antennas. I salvaged an antenna from one of them, and now I get better reception.

You have mail, power usage.

After a less than 24 hours my mail sensors died. Batteries where around 1 volt, so it had drained them pretty quickly, something had to be done.

First I started to measure how many mA my circuit uses. But I was faced with a continually resetting Esp8266. At first I thought it had somehow messed the program in it's flash because of low voltage situation, but after a while of debugging I got the idea to measure the voltage, and it turns out that when measuring mA my multimeter drops the voltage from 3.3 to 3.1, and that makes the Esp8266 go crazy. Then I moved amperage measuring before the dc-dc converter. After that the circuit worked fine. There is a nice article about this issue here http://www.eevblog.com/files/uCurrentArticle.pdf

The following amperage readings are before the dc to dc converter when I powered the circuit from usb at 5 volts. When Esp8266 was active the circuit drawed around 40 - 100 mA of current. In deep sleep it took about 8 mA, which was quite high. After a bit of googling I found that the power led was using significant amount of power, so I took it out. Power went down to 3.4 mA, which is still quite high. After some thinking I started looking at how much TSL257 draws current, and it was typical 1.9 mA and max 3.5 mA according to datasheet. After moving TSL257 power to gpio, so it's only on during mail check, deep sleep current is 0.5mA, which is pretty much all taken by the dc-dc converter. Which I can't do anything about, without buying a new converter, so I'll settle for this now. If aaa batteries are about 1000 mAh then they should last about 1000/0.5/24=83 days, so over two months. Which at least gives me some time to think what I will do.

You have mail

Have you ever wondered has the mail arrived yet? I got my ESP8266 some while ago and was wondering what to do with it. After a while I thought it would be perfect for checking if mail had arrived, and I mean the traditional physical kind with envelopes.

Hardware

I figured some kind of light gate would be good for detecting if there is something in the mailbox. At first I tried with ldr and some led's, but couldn't get it to work. Either it didn't notice the led or ambient light was enough. Probably if I had a different type of ldr with different resistance it could have worked, but I didn't. So I used a TSL257 that I had lying aroung, and it seems to do the trick.

On the hardware side everything is simple, TSL257 connected to input pin, and a led with a transistor connected on a output pin. Because Esp8266 can only output a maximum of 12mA on it's pins I put a transistor to drive the led, so I could drive it at a higher amperage. Fritzing ESP-201 module from https://github.com/ydonnelly/ESP8266_fritzing.

Since I use deep sleep between checks XPD has to be connected to reset pin(black wire). Resistors on top of the Esp-201 and the yellow wire are for normal boot mode, as the module doesn't have these ready.

If pin2 (gpio4) is pulled low then the normal check and sleep is not done, this is so you can update lua scripts without reflashing the whole thing.

For a power supply I use three aaa batteries in series and a step down converted to get the 3.3 volts that is needed.

Since the circuit was so tiny I didn't use a pcb but just soldered the components together. Wires going to top right are for led and wires going bottom left are for TSL257.

I used a ESP-201 module, because it has an external antenna, and it's small and cheap. Because it doesn't have a usb connector it also has slightly smaller power usage, but I have to use a separate usb to serial module for programming. At first I used cheap clone ordered from aliexpress, but kept getting errors when flashing. So I bought a different module from a local shop and it worker like a charm. Others have also had trouble with cheap usb to serial modules when flashing ESP8266 modules.

Here is the device installed. Installation is not permanent, so I can better debug or change something if need be. Also we will probably get a new mailbox soon. Which would be good because our current mailbox is made from plastic and it lets light in just enough that when sun is shining it interferes. I had to tape the inside to block sun light.

And here is the inside.

Software

For programming I wanted to use NodeMCU and lua. I wanted to see if a interpreted language would be good enough, and it also has mqtt support.

Script itself is pretty simple:

1. wakeup
2. check if we see light, if so then there is too much light -> error
3. turn on led
4. check if we see light, light -> no mail, no light -> mail
5. send message
6. sleep

Programming with NodeMCU is pretty straightforward. But because it's event driven there is a bit of extra work with callbacks for this kind of batch job.

Code can be found here https://github.com/mika-koivusaari/you_have_mail.

Future improvements

After deep sleep check mail status first, and only if it has changed start modem and send message. Not sure how much this would improve battery life, but if it seems too short then I'll try.

Report battery status. Esp8266 only has adc range from 0 to 1 volts, so I would need to scale the voltage from three aaa batteries to that. Need to look into that sometime, it would probably be useful for other projects too.

Look for mqtt broker with mDNS, NodeMCU doesn't current have a mDNS client, so this will have to wait for that.

Next I'll have to make some kind user interface so I can actually see when the mail arrives.